Parameter (1)
|
CW Output Power |
Po |
W |
16 |
- |
- |
| Threshold Current |
Ith |
A |
- |
1 |
- |
| Operating Current |
Iop |
A |
- |
- |
5.5 |
| Operating Voltage |
Vop |
V |
- |
- |
8 |
| Reverse Voltage |
Vre |
V |
- |
10 |
- |
| Slope Efficiency |
η |
W/A |
- |
4 |
- |
| Electrical-to-Optical Efficiency |
PE |
% |
- |
45 |
- |
| Center wavelength |
λc |
nm |
790 |
- |
796 |
| Spectral width (FWHM) |
δλ |
nm |
- |
3 |
-- |
| Back reflection wavelength |
λ |
nm |
1900 |
- |
2100 |
| Back reflection isolation |
- |
dB |
- |
30 |
- |
| Wavelength Shift with Temperature |
- |
nm/℃ |
- |
0.3 |
- |
| Light within 0.15NA |
- |
% |
- |
90 |
- |
| Fiber Data |
Buffer Diameter |
Dbuf |
μm |
- |
250 |
- |
| Cladding Diameter |
Dclad |
μm |
- |
125 |
- |
| Core Diameter |
Dcore |
μm |
- |
105 |
- |
| Numeric Aperture |
NA |
- |
- |
0.22 |
- |
| Fiber Length (2) |
Lf |
m |
- |
1 |
- |
| Fiber Bending Radius |
- |
mm |
60 |
- |
- |
| Others |
ESD |
Vesd |
V |
- |
- |
500 |
| Storage Temperature |
Tstg |
℃ |
-20 |
- |
70 |
| Lead Soldering Temp |
Tls |
℃ |
- |
- |
260 |
| Lead Soldering Time |
t |
sec |
- |
- |
10 |
| Operating Case temperature (3) |
Top |
℃ |
15 |
- |
35 |
| Relative Humidity |
RH |
% |
15 |
- |
75 |
| Operating Notes |
● Avoid eye exposure to direct or scattered radiation.
● ESD precautions must be taken.
● Please connect pins to wires by solder instead of using socket when operation current is higher than 6A.
● Soldering point should be close to the root of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 second.
● Use constant current power supply. Avoid surge current.
● Laser diode must be used according to the specifications.
● Laser diode must work with good cooling.
● A minimum bend radius should be 300 times greater than the fiber cladding diameter, dynamic bend radius should be 400 times greater than the fiber cladding diameter.
● Operation temperature is 15℃~ 35℃.
● Storage: -20℃~ +70℃, all pins short-circuit. |
| Remark |
(1) Data measured under operation output at 16W.
(2) Other length available upon request.
(3) Operating temperature defined by the package case. Acceptable operating range is 15 - 35C, but performance may vary. |
 |
