Variable-Frequency RF Drivers

 Variable-Frequency RF Drivers

Product name : Variable-Frequency RF Drivers
Description :
Unice offers a large verity of RF Drivers compatible with our Acousto-Optic components. The following instructions will help you choose and pick the proper variable frequency driver for your application.

More detail products information please contact with our services center.
E-mail: unicehq@unice.com.tw

Specification

More detail products information please contact with our services center. E-mail: unicehq@unice.com.tw

Model. VFX-XX-YY-V-A-F2 VFX-XX-YY-V-B1-F2/2Ch
Frequency Range Corresponding to the AO Device Requirements Matching the 2-D AOD controlled by application of external tuning voltage
Tuning Voltage  0 - 10 V analog (-2 to +20 VDC no damage) 
Frequency Stability 1% nominal after 15 minute warm-up, constant temperature
Scanning Speed 50 micro sec from min to max frequency with step change in tuning voltage 
Output Power Power is optimized for peak efficiency with supplied AO device. 
Modulation Type  Analog Amplitude or TTL Compatible (optional) DC-50 MHz 
Modulation Input 50 Ω; 0-1 V or 330 Ω; 0-5 V 
Operating Power   90-240 VAC ±25% 50-60 Hz 
Enclosure   The unit will be packaged in a 190 mm (7.5 inch) wide by 100 mm (4 inch) high by 220 mm (8.75 inch) deep instrument case. The rear panel heat sink increases the depth to 240 mm (9.75 inches) maximum. The size is exclusive of connectors. A detachable AC line cord and RF cable are provided. 
Environmental   Nominal Laboratory Conditions: The maximum temperature is +35° C. The unit is not sealed against moisture or condensing humidity. 
Remark:
1. In addition to the standard product shown above, customer configurations are available for specialized applications. 

Ordering Information

Unice  Variable-Frequency RF Drivers