50(150)A-BB-26-QUAD

產品型號：50(150)A-BB-26-QUAD
產品說明：

The BeamTrack series 50(150)A-BB-26-QUAD laser measurement sensor measures laser beam position as well as power and energy. It has a 26mm aperture and can measure position to 0.1mm accuracy. It measures power from 40mW to 50W continuously and to 150W intermittently.It can measure energy from 20mJ to 100J.

價格(NTD)：$0

產品說明

Model Use	50(150)A-BB-26-QUAD (a) General purpose
Functions	Power / Energy / Position
Absorber Type	Broadband
Spectral Range	0.19 - 20µm
Aperture	Ø26mm
Power Mode
Power Range	40mW - 150W
Maximum Intermittent Power	150W for 1.5min 100W for 2.2min 50W continuous
Power Scales	150W / 50W / 5W
Power Noise Level	2mW
Maximum Average Power Density	12 kW/cm² at 150W 17 kW/cm² at 50W
Response Time with Meter (0-95%) typ.	1.5s
Calibration Uncertainty	±1.9%
Power Accuracy	±3%
Linearity with Power	±1.5%
Energy Mode
Energy Range	20mJ - 100J
Energy Scales	100J / 30J / 3J / 300mJ
Minimum Energy	20mJ
Maximum Energy Density J/cm²
<100ns	0.3
0.5ms	5
2ms	10
10ms	30
Beam Tracking Mode
Position
Beam Position Accuracy (c)	0.1mm
Beam Position Resolution mm	2.5% of beam size
Min Power for Position Measurement	1W
Size (d)
Size Accuracy mm (e)	N.A.
Size Range mm (4σ beam diameter)	N.A.
Min Power Density for Size Measurement	N.A.
Cooling	convection
Fiber Adapter Available	ST, FC, SMA, SC
Weight	0.4Kg
Part number	7Z07937
Notes: (a) The BeamTrack features are supported by Centauri, StarBright, StarLite, Nova II and Vega meters, Juno, Juno+ and EA-1 interfaces and StarLab application. Position and Size measurements work only in Power mode (but not in single shot Energy mode). (b) For powers up to 30W it is recommended to work with the fan off and then the noise level is ~3 times lower. It is also recommended to measure energy with the fan off. (c) Position accuracy for the central 10mm of the aperture as limited by beam position resolution. Position can be tracked with ±1mm accuracy over the entire aperture. Accuracy is reduced by a factor of 3 at minimum power. Position measuring center corresponds to geometrical center within <1mm. Position center can be software reset to geometric center or other desired position with Centauri, StarBright or StarLab. (d) Assumes laser beam with Gaussian (TEM00) distribution. For other modes, size measurement is relative. (e) Accuracy spec will be maintained for beams from 3.5 to 17mm not deviating from center more than 15% of beam diameter. For beams below 8mm in size and powers above 75W error in size can reach ±10%.