Model : WAT-910HX-RC

Description :

Key Features
● 3D Noise Reduction (3DNR)
● Low Light Sensitivity/0.000005 lx. (F1.4, Slow shutter mode: 256 fields)
● On Screen Display Contorlled by Jog Dial Switch On-Camera
● Digital Wide Dynamic Range
● Dead pixels correction
● Motion detection

Model WAT-910HX/RC
Pick-up element 1 /2 inch interline transfer CCD image sensor
Number of total pixels 811(H) x 508(V) EIA
795(H) x 596(V) CCIR
Number of effective pixels 768(H) x 494(V) EIA
752(H) x 582(V) CCIR
Unit cell size 8.4μm(H) x 9.8μmm(V) EIA
8.6μm(H) x 8.3μm(V) CCIR
Synchronizing system Internal
Scanning system 2:1 interlace
Video output Composite Video, 1.0 V(p-p), 75Ω, unbalanced
Resolution (Horizontal) More than 570TVL (Center)
Minimum illumination 0.000005lx. F1.4 (Shutter: x256, AGC: HIGH, γ:0.35)
S/N More than 52dB (AGC=6dB, γ=1.0)
Function settings OSD (On Screen Display) operated by remote controller
Electronic iris 1/60 - 1/100000 sec. EIA
1/50 - 1/100000 sec. CCIR
x256(field) *selectable -1/100000 sec.
Electronic shutter x2, x4, x8, x16, x32, x64, x128, x256 (field)
1/60, 1/100 sec. EIA
1/50, 1/120 sec. CCIR
1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/100000 sec.
AGC ON LOW: 6-30dB / MID: 6-34.5dB / HIGH: 6-41dB
OFF 6-41dB (1dB step) *selectable
Gamma characteristics γ≒0.05-1.00 (0.05 step), USER *selectable
Noise reduction 3DNR ON *selectable / OFF
Wide dynamic range WDR(Digital Wide Dynamic Range) USER1 / USER2 / OFF
Motion detection Max. 4 areas selectable (Out-put terminal available)
Lens iris Video / DC (Auto-select)
Back light compensation OFF / BLC / HSBLC
White blemish correction Up to 64 dots correctable by OSD operation
Power supply DC+12V±10%
Power consumption 1.38W (115mA)
Operating temperature -10 ~ +50℃
Storage temperature -30 ~ +70℃
Operating / Storage humidity Less than 95% RH (Without condensation)
Lens mount CS (Back focus adjustable)
Weight Approx. 83g
Dimensions (mm) Unice WAT-910HX CameraUnice WAT-910HX Camera