TRANS-PH-KIT-SS

Model : TRANS-PH-KIT-SS

Description :

This versatile kit turns your visible wavelength spectrometer and light source into a transmissive pH probe. It uses a randomized fiber bundle probe in a stainless steel, selected by the user based on environment. For example, long term monitoring in seawater would use the PEEK probe due to the corrosion sensitivity of stainless steel.

This kit can be used with your spectrometer system as a replacement for any traditional electrode pH sensor, and comes with 5 transmissive pH patches to get you started.

● Recommended for use with spectrometers configured with a 25 – 50 μm slit.
● Both light source and spectrometer must measure 620 nm and either 510 nm or >750 nm
● Samples must be clear, not colored or turbid.
● Sample volume is 3+ mL.
Specification

TRANS-PH-KIT-SS kit Included:

Item Description
PH-BCG-TRANS 5-pack of transmissive pH sensing patches
RE-BIFBORO-2 Randomized bifurcated probe assembly
T300-SLEEVE Stainless steel transmission dip probe sleeve
RT-5MM Stainless steel transmission dip probe tip

Specification

Model TRANS-PH-KIT-SS
Probe diameter: 6.35 mm (1/4″)
Probe length: 127 mm
Fiber length: 2 meters
Breakout: 1.5 meters from the end of the probe
Temperature limit: Up to 100ºC without sleeve
Pathlength: 5 mm
Probe material: Stainless steel outer sleeve, aluminum second surface mirror
Pressure: 100 psi
Fiber jacketing: Black PVC monocoil
Connectors: SMA 905